|
|
OpenSource Handheld News - Gp2X, Dingoo, Wiz, Pandora, GCW Zero and Caanoo is a News and downloads site for Open Source Handhelds, We have all the latest emulators, hack, homebrew, commercial games and all the downloads on this site, the latest homebrew and releases, Part of the
DCEmu Homebrew & Gaming Network.
THE LATEST NEWS BELOW
|
May 29th, 2010, 00:36 Posted By: wraggster
News from http://www.open-pandora.org/index.ph...emid=2&lang=en
Wow, what a lot of work! But so far no bigger problems, but lots of positive reports, really assuring us 
I've been helping out here for the 2,5 days already, and we're managing it quite good.
Speed is improving, we don't make too many mistakes we need to fix and based on the feedback from the first users, we optimize the building process.
At least 60 units should have reached the customers so far and there were only a few problems.
A dead battery, a dead PSU (which can happen, unfortunately), one broken WiFi and a broken backlight.
For the very first units, that's a good quote - basically only one two broken ones.
As some guys were asking about quality checking - here's what we did for the first units:
1. The boards including all the hardware are being tested in Texas after population.
2. After we assemble them, we have a special bootloader where we can test all controls and the LCD.
3. Then we install the firmware - ready to ship.
Based on the feedback we got and the one broken WiFi one, we changed that a bit.
Before we install the firmware, we do a WiFi test (it connects and downloads a small file).
As another user had the problem that his unit shutdown during first boot (flat battery) and then he couldn't login, we're also doing that first boot (which configures the system and takes a while) right here.
And we do that completely from the battery - so most faulty batteries should also be recognized.
So right now, that's what we do:
1. The boards including all the hardware are being tested in Texas after population.
2. During assembly, we test the controls and the LCD.
3. After screwing them together, we do the WiFi test and a different person tests the controls as well.
4. We install the firmware and do the complete first boot from battery.
5. After that, the unit is ready to ship.
This helps to make sure that no faulty unit should reach you. And if one slips through our hands (well, we can't possible charge all batteries for 6 hours to see if they work well), then we will replace it, that's for sure.
Some other questions have occured regarding the firmware, so I'm going to give newcomers some tips here:
1. Right now, WiFi is always enabled on Bootup. This eats some battery power - especially, if it keeps looking for networks and can't find any. So unless you want the unit to be always-on, you should probably disable it. That can easily be done: Go to Settings / Startup and disable WiFi on bootup. After you did that, you need to Toggle WiFi (that's in the system menu) before you use it.
2. It seems the Network Manager has a problem: When it disconnects, it can't reconnect. It seems that's also the case on standard Linux desktops. We'll look into this, however, if you lose connection at the moment, you need to reboot. You should only lose connection though if the WiFi signal is flaky - we ran some units for 48 hours as a test without a single reconnection.
3. When you use the nubs, they need to some time to calibrate. Usually, it automatically happens while using them, however, to make sure they work fine, slowly move them into each direction (Up, Down, Left, Right) and stay there for 1 or 2 seconds. Let them go back to the center each time before you move it into the next direction.
4. Just switched on your unit and right while booting the screen switches off? No worries, your unit is NOT broken. It's a feature that also turned into a bug: When you shutdown the unit, it saves the brightness value and applies that on startup, which is a good thing. However, if you shutdown the unit and close the lid, then the brightness value goes to 0 - and that's what the unit saves. So on next startup, it will switch off during booting process. That's not a big problem - just wait until it booted and use the brightness control on the keyboard to make it bright again. Another fix for a firmware update
5. Not firmware-related: But be sure to first CHARGE the unit before using it
That's it. So far, we got a lot of positive reports, which is pretty cool.
Funny thing is that some users bashed the Pandora - without even having one (well, we know where we ship the units to).
I have no idea why they do this, but we're sure: The more Pandoras are out there, the more positive posts will appear.
So, it's back to work for me, so that more units can find their way home
To read more of the post and Download, click here!
 Join In and Discuss Here
Submit News and Releases Here and Contact Us for Reviews and Advertising Here |
|
 |
|
|
|
May 27th, 2010, 01:06 Posted By: wraggster
Newly released for Pandora:
Arora is included in the Pandora firmware, and runnable from xfce's menu. Minimenu will use it for showing PND file documentation, but doesn't include a default way to launch it if you just want to run the browser.
This pnd file is just a wrapper to run the built in Arora.
Place it in /pandora/mmenu on an SD card, and it'll show up in minimenu, but not in xfce/etc. (They already have it, and you don't want a second icon for it in the xfce menu.)
This will show an "Arora Browser" icon in your Network/WebBrowser categories in minimenu
http://dl.openhandhelds.org/cgi-bin/...0,0,0,0,112,69
To read more of the post and Download, click here!
Join In and Discuss Here
Submit News and Releases Here and Contact Us for Reviews and Advertising Here |
|
|
|
|
|
May 26th, 2010, 00:53 Posted By: wraggster
News via http://www.gp32x.com/board/index.php...dpost&p=856335
Just after we started shipping the first Pandoras, we found out that some Python packages had gone missing in the OS - and that the kernel had one bug.
We fixed those problems already, so we suggest you install the HotFix package when you receive your Pandora.
If you don't install the package, Python games like Angry Drunken Dwarfs will not run.
Aditionally, we released the Community Codec Package, which installs Gnome-MPlayer and a lot of restricted codecs which allow you to play videos and audio.
Due to licensing issues, we can't include them in the normal OS installation, that's why we released that codec pack.
Some programs like Exaile won't run without it.
Installing both packages is easy: Simply put them into either the /pandora/menu or /pandora/desktop-Directory of your SD Card, start them, enter your password and follow the on-screen instructions.
After it's installed, you can remove the PND-Files.
You can grab them and more information about them here --> http://www.open-pandora.org/index.ph...=178&Itemid=32
To read more of the post and Download, click here!
Join In and Discuss Here
Submit News and Releases Here and Contact Us for Reviews and Advertising Here |
|
|
|
|
|
May 24th, 2010, 23:25 Posted By: wraggster
At this point, we don't even know if HP's Slate is still hitting the market -- but one thing we do know is that there's no evidence to suggest that the company will be releasing it with webOS instead of Windows 7. In fact, the two platforms are so wildly different and targeted for such disjoint devices -- never mind the fact that HP and Palm aren't yet united in the legal sense of the word -- that there's virtually no chance that the existing Slate hardware could be effectively used in time for a near-term webOS tablet launch (at least, not a tablet that anyone would want to buy). There's word on Gizmodo today that the Slate will be offered as a webOS device, but that appears to be a misinterpretation of a DigiTimes report from HP Taiwan that the company intends to use Palm's operating system to underpin both "smartphones and tablets," while avoiding porting it to netbooks since they're "more similar in functions with traditional computers." Given the Slate's lukewarm reception, we can totally understand HP canning it in its current incarnation -- but you can't just drop a flashy mobile platform onto it and call it good. Interestingly, the DigiTimes report goes on to say (on an unrelated note) that the Slate will come to market before October, but it's unclear whether they're taking into account the most recent round of rumors that it's been deep-sixed; guess we'll know soon enough.
http://www.engadget.com/2010/05/24/h...ws-7-to-webos/
To read more of the post and Download, click here!
Join In and Discuss Here
Submit News and Releases Here and Contact Us for Reviews and Advertising Here |
|
|
|
|
|
May 23rd, 2010, 22:22 Posted By: wraggster
Newly released for Pandora
The Hammer of Thyrion project is a cross-platform source port effort: We continue the development for Linux, BSD and Mac OS X people, with continued support for Windows users as well. Many bugs are fixed and even new features are added: New sound modes, improved mouse handling, improved video modes, OpenGL glows and more. You can go to our project page for more information.
Website: http://uhexen2.sourceforge.net/
Download Here
To read more of the post and Download, click here!
Join In and Discuss Here
Submit News and Releases Here and Contact Us for Reviews and Advertising Here |
|
|
|
|
|
May 23rd, 2010, 17:47 Posted By: wraggster
The open-source Pandora handheld has had a long and arduous time to market, but the days of delay are apparently at an end. You gaze upon the very first Pandora off the assembly line -- the fruit of over two years labor -- and project leaders are presently shipping out the rest of the first completed batch, with scores if not hundreds already on the way. GP32X forum mod X68000 got this unit for his help in construction, which means you can see Pandora's box literally opened at our source link (har har). Puns not your thing? Spot a batch of handhelds at the soldering station instead, right after the break.
http://www.engadget.com/2010/05/23/p...-unit-unboxed/
To read more of the post and Download, click here!
Join In and Discuss Here
Submit News and Releases Here and Contact Us for Reviews and Advertising Here |
|
|
|
|
|
May 22nd, 2010, 23:42 Posted By: wraggster
Looks like the Dream is going to happen very soon with the assembling of Pandora Consoles at full steam now, heres the details from the Official Blog
... I'm slightly maaad!
Well, yes, that's basically also true... but this time, another thing came true: The Pandora!
Yep, we started assembling and already shipped out some of our babies yesterday! What a relief!
Craig, Michael and Fatih are already working together with other folks to build Pandoras, I'll join them on Monday. I'll also setup the webcam when I'm there.
Hopefully, it will work, as Craig told me internet connection in that hall is not too reliable, but we'll see.
While this certainly is a big step for us, there's still a lot of work to be done. We have to try to finish the first batch as soon as possible and also have to manage parts and production for the second batch.
Please bear with us if this could take a while, we're still humans (no cyborgs) and are working as fast as we can.
Thanks to EVERYONE helping us - our devs, our wifes / girlfriends, and - of course - you. The community. Let the fun begin!
http://www.open-pandora.org/index.ph...emid=2&lang=en
To read more of the post and Download, click here!
Join In and Discuss Here
Submit News and Releases Here and Contact Us for Reviews and Advertising Here |
|
|
|
|
|
May 21st, 2010, 23:56 Posted By: wraggster
Newly released for Pandora
Kronos is an interpreter for text adventure story-files.
Currently supported are Magnetic Scrolls games, though Infocom and Scott Adams (and others) will be supported soon.
Currently features are limited (you can play the games, save, etc, but nothing fancy), but will be adding automapper, touchscreen support for word picking, and other conveniences.
Download Here
To read more of the post and Download, click here!
Join In and Discuss Here
Submit News and Releases Here and Contact Us for Reviews and Advertising Here |
|
|
|
|
|
May 21st, 2010, 23:55 Posted By: wraggster
Newly released for Pandora
Hatari is a very good emulator for ST and related machines (TT030, Falcon, etc, though ST support is its focus.) This is a full port of the emu, including hard drive support, etc.
The pnd-file includes setup documentation, just check the Documentation link in xfce or minimenu.
Download Here
To read more of the post and Download, click here!
Join In and Discuss Here
Submit News and Releases Here and Contact Us for Reviews and Advertising Here |
|
|
|
|
|
May 18th, 2010, 23:13 Posted By: wraggster
The worst of Palm's fears may be over now that HP has played the knight-in-shining-armor role, but Sprint -- the States' number three carrier -- still has a ways to go before it can claim it's out of the woods, having gone a solid string of fiscal quarters now without posting a profit or a net gain in subscribers. Of course, this is the kind of situation that puts dudes with the word "financial" in their titles on the hot seat, and sure enough, Sprint CFO Robert Brust came out swinging at an investor conference this week. Brust points to narrowing losses and an expanding prepaid presence as reasons he thinks the company can grow revenue by year-end, not to mention an expanding 4G footprint and -- on a closely related note -- the imminent release of the EVO 4G. Showing a bit of humility, he also said that the company has "learned a lot" since the launch of the Pre, acknowledging that the phone "didn't work out as well as [they] hoped." In other words: we wouldn't expect any more crazy two-phone exclusive deals with Palm lasting the better part of a year any time soon.
http://www.engadget.com/2010/05/18/s...l-as-we-hoped/
To read more of the post and Download, click here!
Join In and Discuss Here
Submit News and Releases Here and Contact Us for Reviews and Advertising Here |
|
|
|
|
|
May 18th, 2010, 00:29 Posted By: wraggster
In a volatile Android ecosystem where bigger and better phones pop up every week, your Nexus One might be feeling a little obsolete. Frankly, there's hardly a better way to cheer it up than by installing an operating system that's a little more its speed. In the finest DOSBox tradition, one gentleman recently imbued his Googlephone with Windows 3.11, by far our favorite 1993 Microsoft OS. Realizing the futility of getting it to do anything -- ah, memories -- he set about crafting a step-by-step guide for you to do the same. If you care to give his misery company, you'll find instructions at our source link; if not, don your rose-tinted glasses and peep the video after the break.
http://www.engadget.com/2010/05/17/n...thing-weve-se/
To read more of the post and Download, click here!
Join In and Discuss Here
Submit News and Releases Here and Contact Us for Reviews and Advertising Here |
|
|
|
|
« prev
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
next » |
|
|
